A vaporizer whip is a long flexible tube attached to the vaping device, which you use to pull the vapor into the mouth. It is one of the essential components when cleaning a vaporizer because it gets dirty easily compared to any other part of the vaporizer.
As you vape, some residue sticks to the whip creating a film of dirt that may alter the flavor and airflow from your vape. Therefore it is essential to clean it regularly to have an amazing vaping experience. Some of the easy ways you can use to clean your vaporizer whip include:
1. Boiling Vaporizer Whips
This is one of the easiest and best ways of cleaning your whip. This method requires a large cooking pot, a heat source, and tongs.
You first bring the water to a boil, then use thongs to lower your whip into the boiling water. You then let the whip sit in the hot boiling water for a couple of minutes. Thereafter use tongs to stir the whip in the water for a few seconds, then remove it from the boiling water.
Additionally, you can add a bit of dishwashing liquid or soap for effectiveness and thorough cleaning of the inside of the whip. However, always check the material used to make your whip, as different types of whips sold online or in physical shops can be made from different materials before settling on this method, as some may not be heat resistant. Therefore try the boiling method when cleaning your whip, as it is cost-effective and easy to apply.
2. PBW soak
PBW is another method you can easily apply when cleaning your vaporizer whip.
For this method, you require PBW, water at room temperature, a basin for soaking the whip, and gloves. Gloves are important in this process because they prevent the hands from drying out; however, PBW is safe and has no major effect on the skin.
The first step is to place the vaporizer whip into the PBW that is properly mixed with water and let it soak overnight. After letting it sit for the night, take it out and rinse it with clean water. This method works effectively in cleaning the dirt in the pipes; additionally, because you are using alcohol, do not let the whip soak for long periods, as the alcohol may cause damage to the whip. Lastly, rinse the whips properly to remove the alcohol, as it may alter the taste of your vaporizer.
3. Use Isopropyl Alcohol
The ISO method can also be effective if you want to clean out every residue in the whip.
This method requires ISO, salt granules, water, and a basin. The salt is vital in this process as it helps to scrub because of the friction it causes in the whip. Mix the alcohol and salt with water, then place the whip inside the mixture to soak. Let the whip be fully submerged and soak for a few hours.
For more effective results, you can let the whip soak overnight. The mixture of alcohol and salt lifts the residue in the whip, making it clean. After letting it sit for the preferred duration, rinse it in clean water and let it air dry before attaching it to the vaporizer.
You can also pour the mixture inside the whip after closing the two ends and try folding it so that the salt granules can help scrub the walls without necessarily soaking it. This method is easy to use as the products like alcohol are affordable and readily available in drug stores.
4. Use Pipe Cleaners
Using pipe cleaners is also one of the easiest ways of cleaning vaporizer whips, as they work as cleaning brushes to reach areas that are impossible to reach with your fingers. Using this method requires firm pipe cleaners, ISO, and water.
You first soak the pipe cleaner in the alcohol solution and then insert it inside the whip while trying to scrub the walls of the whip. You can thoroughly rinse in clean water to wash off the residue. It would be best to soak the whip in hot water with a washing liquid as the residue gets dissolved, making the scrubbing easier.
5. Use Vinegar
Vinegar is an all-time natural liquid used to clean your vaporizer whip. It is more effective than hot water as it adequately disinfects and clears the residue off the whip.
Vinegar contains acetic acid that works on the dirt film in the whip. For this method, you will need white vinegar and a bowl. First, place the whip inside the bowl full of vinegar and let it sit for two hours. Thereafter, remove it from the vinegar and rinse it with clean water. This method is very effective because, besides cleaning, it increases the durability of the whips.
It is vital to have a clean whip if you want to enjoy your vaping experience. This is because dirt affects the airflow and the general taste of the vape liquid and flavor. Therefore make use of the most effective method of cleaning your whip from the list above to achieve a fulfilling vaping experience. Additionally, it would help if you researched the compounds you use for the cleaning before making a purchase.